Toggle Switches
Honeywell offers a wide variety of current sensors to monitor alternating (ac) or direct (dc) current.
Optimal operator interface for controlling machine function to construction and agriculture equipment OEMs, in addition to aerospace, air transport, armored fighting vehicles. Honeywell toggle switches withstand wet, dust, dirty environments and are designed for use in harsh environments.
With many configurations available, Honeywell engineers can help with quick customization.
- Environmental and hermetic switches for demanding environments
- Completely sealed switching chamber to withstand wet, dust, and dirty environments
Six toggle series meet a variety of electrical and load requirements for suitable applications MIL-qualifications for military applications 2- or 3-position, momentary and/or maintained action to meet any circuitry requirement. 1-, 2- or 4-pole circuitries are also available. IWTS (integrated wire termination system) offered for ease of assembly and additional behind the panel sealing. Low profile switches available where space behind the panel is limited. Pull-to-unlock lever available to prevent accidental operationSwitches available for low-cost commercial applications
AT Series
Commercial Grade Toggle Switch
- Stainless steel toggle.
- 2- or 3-position, momentary and maintained action
- MIL-PRF-8805/26/98. 0.1 A to 5 A res..
- Silver & gold contacts.
- Variety of levers, terminations, and actions.
ET Series
Magnetically Held Toggle Switch
- Magnetically held toggle.
- MIL-S-5594.
- 7 A max..
- Fine silver contacts.
- Screw, leadwire, and turret terminations.
TN Series
Commercial Grade Toggle Switch
- UL, CSA, CE.
- Sealed to NEMA 3, 3R, 4, 13 and IP67/IP68 for global use
- Up to 20 A (resistive).
- Variety of actuators, actions, terminations, and circuitries.
TL Series
Military Grade Toggle Switch
- MIL-DTL-3950, UL, CSA, CE.
- Up to 20 A (resistive).
- Variety of actuators, actions, terminations, and circuitries.
TS Series
Genral Purpose Toggle Switch
- Strain gage transducer simulator.
- Rugged weatherproof case.
- Precision wire wound resistors.
TW Series
Genral Purpose Toggle Switch
- Miniature stainless steel toggle.
- UL, MIL-DTL-83781. 0.1 A to 5 A.
- Variety of actuators, actions, terminations, and circuitries.
Mirco Switch Toggle Switch | Honeywell
| SERIES | NT | TW | TL | AT | ET |
|---|---|---|---|---|---|
| Typical applications | Aerial platform lifts • Platform lifts for trucks • Industrial equipment • Railroad locomotives and maintenance equipment • Construction equipment • Agricultural machinery • Syringes (end of travel) | Military and commercial aircraft and helicopters • Aviation ground support equipment • Military land vehicles (track and wheeled vehicles) • Industrial machinery and construction equipment • Process control | Miliitary and commercial aircraft: fixed wing aircraft and helicopter flight decks • Aviation ground support equipment: pumps, lights, and lift platforms • Military land vehicles (track and wheeled vehicles): lights, pumps, arming equipment, and lifts/ramps, etc. • Construction equipment: road milling, road pavers, trenchers, and stump cutters | • Aircraft (commercial and military) • Military ground vehicles • Flight controls • Vehicle panel controls | Flight decks for commercial and military aircraft and helicopters |
| Type | commercial-grade toggle | miniature stainless steel toggle | military-grade toggle | stainless steel toggle | magnetically held toggle |
| Sealing | IP67/68; NEMA 3, 3R, 4 and 13 | qualified to MIL-DTL-83781 | qualified to MIL-DTL-3950 | MIL-PRF-8805/26/98 | most listings qualified to MIL-S-5594 |
| Operating temp. | -40°C to 71°C | -65°C to 71°C | -65°C to 71°C | various | -65°C to 71°C |
| Actuator/lever | standard, locking, special design, tab | standard, locking, special design, tab | standard, special design, tab, paddle, none | standard, locking, tab, special design | standard, pull/push-to-unlock, tab |
| Action | 2- or 3-position, momentary & maintained | 2- or 3-position, momentary & maintained | 2- or 3-position, momentary & maintained | 2-position, momentary & maintained | 2- or 3-position, momentary & maintained |
| Mounting | bushing 15/32 in | bushing 15/32 in or 1/4 in | bushing 15/32 in | 15/32 in bushing, 1/4 in bushing, 3-hole, above panel | bushing 15/32 in |
| Termination | solder, screw, quick connect | IWTS, solder, screw, quick connect, H58, T2 | IWTS, solder, screw, quick connect, leadwire | solder, solder T2, screw, quick connect, leadwire, H58 | screw, leadwire, turret |
| Circuitry | SPST, SPDT, DPST, DPDT, 4PST, 4PDT | SPST, SPDT, DPST, DPDT | SPST, SPDT, DPST, DPDT, 3PST, 3PDT, 4PST, 4PDT | SPDT, DPDT, DPNO, 3PDT, 4PDT, 6PDT, 8PDT, 10PDT | SPDT, DPDT, 4PDT |
| Contacts | silver alloy, gold-plated | fine silver, gold-plated | silver alloy, gold-plated | silver, gold, bifurcated gold | fine silver |
| Amp rating | up to 20 A (resistive) | 0.1 A to 5.0 A @ 0.5 Vdc to 28 Vdc | 0.1 A to 5.0 A @ 0.5 Vac to 115 Vac | up to 20 A (resistive) | 0.01 A to 5 A (resistive) | 7 A max. (resistive) |
| Measurements | 58,4 mm H × 33,5 mm W × 22,6 mm D | 49,78 mm H × 14,61 mm W × 14,61 mm D | 58,4 mm H × 33,5 mm W × 22,6 mm D | various | 51,56 mm H × 25,4 mm W × 25,4 mm D |
| Approvals | UL, CSA, CE, UKCA | UL, CSA, qualified to MIL-DTL-83781 | UL, CSA, CE, UKCA, qualified to MIL-DTL-3950 | qualified to MIL-PRF-8805/26/98 | qualified to MIL-S-5594 |
| Features | completely sealed switching chamber; enhanced tactile feedback | saves space and weight; sealed bushing versions | environment-proof sealing; qualified to MIL-DTL-3950 | choice of sealed bushing; short behind panel depth | holding coil replaces mechanical holding mechanisms to maintain toggle in operate |
LET’S GET TOGETHER
We are here to help and answer any question you might have.
Looking for a specific item, need help to design customised system or just want to know more about us – we look forward to hearing from you.
Please fill our form, and we’ll get intouch shortly
